STAUFF Test

(copy 31)

Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design phase of a machine, or added at a later stage in the course of retrofitting or upgrading ... learn more

 

 

(copy 32)

Test Couplings

STAUFF Test 20 (Type SMK20) Test Couplings with Ball Check (copy 1)

(copy 40)

SMK with
Port Connection
SMK20

(copy 41)

SMK with
JIC Connection

SMK20-JIC
Type K

(copy 42)

Adaptors
SAD20

(copy 41)

SMK complete
with Straight Fitting

SMK20 Type G

(copy 39)

SMK with
JIC Connection

SMK20-JIC
Type G

(copy 40)

Gauge Adaptor
SMA20 and SMD20

(copy 42)

SMK for 24°
Cone Fittings

SMK20 Type K

neu (copy 5)

Swivel Run Tee
with JIC Connection

SGV-JIC Type F/M

(copy 41)

Bulkheads
SSK20
 

(copy 42)

SMK with
ORFS Connection

SMK20 Type ORFS

STAUFF Test 20 (Type SKK20) Test Couplings with Piston Valve (copy 1)

(copy 44)

SKK with
Port Connection

SKK20

(copy 45)

SKK complete
with Straight Fitting

SKK20 Type G

(copy 46)

SKK for 24°
Cone Fittings

SKK20 Type K

STAUFF Test 15 (Type SMK15) Test Couplings with Ball Check (copy 1)

(copy 44)

SMK with
Port Connection

SMK15

neu (copy 3)

Swivel Run Tee
with JIC Connection

SGV-JIC Type F/M

(copy 47)

SMK complete
with Straight Fitting

SMK15 Type G

(copy 45)

Adaptors
SAD15

(copy 48)

SMK for 24°
Cone Fittings

SMK15 Typ K

(copy 32)

Gauge Adaptors
SMA15 and SMD15

(copy 33)

Bulkheads
SSK15

STAUFF Test 12 (Type SKK12) Test Couplings with Piston Valve (copy 1)

(copy 35)

SKK with
Port Connection

SKK12

neu (copy 2)

Swivel Run Tee
with JIC Connection

SGV-JIC Type F/M

(copy 46)

SKK complete
with Straight Fitting

SKK12 Type G

(copy 36)

Adaptors
SAD12

(copy 47)

SKK for 24°
Cone Fittings

SKK12 Type K

(copy 26)

Gauge Adaptors
SMA12 and SMD12

(copy 27)

Bulkheads
SSKK12

STAUFF Test 10 (Type SMK10) Test Couplings with Ball Check (copy 1)

(copy 28)

SMK with
Port Connection

SMK10

(copy 20)

SMK complete
with Straight Fitting

SMK10 Type G

(copy 13)

Gauge Adaptor
SMA10

(copy 6)

SMK for 24°
Cone Fittings

SMK10 Type K

(copy 34)

Test Adaptors

(copy 21)

Reducing Adaptor
Welding Adaptor
SRS and SAS

(copy 14)

Adjustable
Gauge Fitting

EMV

(copy 1)

Gauge Adaptors
SMA and SMD

(copy 35)

Test Hoses and Connectors

(copy 15)

Test Hoses
SMS and SGS


(copy 37)

Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design phase of a machine, or added at a later stage in the course of retrofitting or upgrading.

They allow machine operators and maintenance personnel to easily and safely connect analogue and digital measuring and display devices for the temporary testing or continuous monitoring of system pressure and other factors.

If required, they also allow venting of the system as well as collecting representative fluid samples, e.g. for analysing the degree of contamination of the fluid.

This type of connection requires no tools and can also be carried out during operation under full system pressure up to 630 bar / 9135 PSI (depending on the type of coupling).

The check valve (ball or poppet valve) integrated into the test coupling opens only after connection of the measuring and display device with suitable adapters or test hoses, which complete the product range. This guarantees safe sealing of the connection without any risks of leakages or fluid escaping from the system.

During production, STAUFF test couplings are not crimped after insertion of the internal valve components and seals but rather closed with a threaded nipple in a fully automa ted process, which secures the proper functioning of the couplings under permanent loads.

(copy 38)

The vibration protection feature, which prevents self-loosening of the protective metal cap caused by vibrations in the system, is another competitive advantage.

For the finishing of the test coupling range in carbon steel, STAUFF relies on the STAUFF Zinc/Nickel surface coating which has proven successful for many years. It provides reliable surface protection – even after transport, handling and assembly – and meets all current legal requirements.

Versions in stainless steel V2A and V4A are generally available from stock. Alternative materials and surfaces are available on request.

For selected types and series, independent certificates and approvals can be provided:

· Military approval for use as gas filling valves for nitrogen
  accumulators by the German Bundeswehr
  (Wehrtechnische Dienststelle für Pionier- und
  Truppengerät)
· DVGW registration as test points for gas pressure
  control systems, issued by the German Technical and
  Scientific Association for Gas and Water